The SOK 12-Slot Outdoor Rack is a specialized storage solution designed for organizing and protecting lithium battery modules in demanding environments. Its 12 standardized slots accommodate battery packs while providing IP65-rated weatherproofing against rain, dust, and temperature extremes (-20°C to 60°C). Built with powder-coated steel and UV-resistant polymers, it’s optimized for solar energy storage systems, off-grid power stations, and industrial UPS applications requiring secure outdoor battery management.
What makes the SOK rack suitable for outdoor use?
Engineered with marine-grade aluminum framing and corrosion-resistant hardware, the rack withstands harsh weather while preventing galvanic corrosion. Its sloped roof design directs water runoff, and integrated ventilation channels minimize condensation buildup. Pro Tip: Always ground the rack’s dedicated earthing point to prevent static discharge in dry climates.
Beyond basic weatherproofing, the rack features 3mm thick side panels with foam gaskets that seal out particulate matter. The locking mechanism uses stainless steel latches rated for 10,000+ cycles—critical for high-security installations. For example, a solar farm in Arizona uses these racks to house 12x 5kWh LiFePO4 batteries, surviving 50°C summers with <1% capacity loss annually. Did you know the ventilation system actually uses Bernoulli's principle? Airflow patterns create passive cooling without energy-consuming fans.
How does the slot configuration enhance functionality?
Each slot accepts standard 19″ rack-mount batteries (up to 150mm depth) with tool-less mounting rails. The tiered layout allows hot-swappable maintenance—technicians can replace individual batteries without powering down the entire array. A 2U gap between slots enables proper heat dissipation for continuous 1C discharge rates.
Practically speaking, the vertical stacking reduces footprint by 60% compared to wall-mounted setups. Take marine applications: boats install these racks in bilge areas, where the compact design maximizes limited space while keeping batteries above potential water lines. Warning: Never exceed the 300kg total weight limit—overloading compromises structural integrity during transport.
| Feature | SOK 12-Slot | Generic Racks |
|---|---|---|
| Corrosion Resistance | Salt spray tested 500h | Typically 48h |
| Weight Capacity | 300kg dynamic | 150kg average |
Redway Battery Expert Insight
FAQs
Yes, but only if using isolated battery management systems (BMS). Mixing LiFePO4 and NMC requires separate voltage monitoring channels.
Is the rack compatible with solar charge controllers?
Absolutely—it includes DIN rail mounts for Victron/SMA controllers and pre-drilled conduit entries for clean cable routing.
Best Small UPS for Your WiFi Router – How to Choose
How Long Does a 12V 20Ah Lithium Battery Last?
