The specifications for the 48V 24-125 13 Raymond CSR30T SA 21 battery aren’t explicitly detailed in available technical literature. This model appears tailored for Raymond CSR30T lift trucks, requiring cross-referencing with OEM documentation to confirm voltage, capacity, dimensions, and cycle life. Standard 48V industrial batteries typically use lead-acid or LiFePO4 chemistry with capacities ranging from 500–1200Ah, but exact specs for this designation remain unverified without manufacturer data.
What Is a Forklift Load Center and Why Does It Matter?
Wholesale lithium golf cart batteries with 10-year life? Check here.
What voltage and chemistry define this battery?
The 48V nominal voltage aligns with industrial forklift power systems. Chemistry likely uses lead-acid for cost or LiFePO4 for longevity, though specific electrolyte composition remains undocumented for this model. Pro Tip: Confirm BMS compatibility when retrofitting lithium into legacy lead-acid systems.
While labeled as 48V, actual operating ranges vary—lead-acid systems discharge to ~42V, while lithium maintains 44–54V. For example, a Raymond EASI® lift truck’s 48V lithium pack delivers 600–800 cycles at 80% DoD. Always verify terminal polarity and communication protocols to prevent controller mismatches.
What’s the physical size and weight?
Dimensions and weight correlate with the 24-125 designation, which may indicate 24-cell lead-acid or modular lithium configurations. Typical 48V forklift batteries weigh 600–1200kg, with footprints matching 1150x500x700mm enclosures. Check compartment clearances before installation.
Practical example: A 48V 750Ah lead-acid battery occupies ~1.2m³ and weighs 900kg, whereas a lithium equivalent reduces mass by 40%. Pro Tip: Use load center calculations to avoid forklift stability issues with lighter lithium packs. How does capacity impact runtime? A 125Ah rating at C/5 rate provides ~25kWh, sustaining 6–8 hours in moderate CSR30T applications.
Want OEM lithium forklift batteries at wholesale prices? Check here.
| Parameter | Lead-Acid | LiFePO4 |
|---|---|---|
| Weight (kg) | 850–1100 | 500–700 |
| Volume (L) | 950–1200 | 600–800 |
Redway Battery Expert Insight
FAQs
No—proprietary communication protocols between Raymond batteries and controllers require OEM-approved replacements to avoid fault codes or performance limits.
How often should the 48V 24-125 battery be watered?
If lead-acid, check electrolyte levels weekly and refill with distilled water after equalization charges. Lithium variants require no maintenance beyond terminal cleaning.
How Much Does a Forklift Battery Really Cost?
