\n
Tel: +86 189 7608 1534
Tel: +86  (755)  2801 0506
  |  

Get Free Quote

REDWAY BATTERY / KNOWLEDGE

What is the difference between the 12V Ultra and standard 12V lithium batteries?

12V 100Ah LiFePO4 Battery Ultra OEM Factory

← More Talk discussions

Redway Battery Editorial Team

Talk / Battery Q&A

Buyer question

An RV upfitter is deciding between the standard 12V 100Ah self-heating OEM pack and the 12V 100Ah Ultra for a tight compartment with a 100A inverter load.

Main answerRedway Battery Editorial Team

Main answer

Direct answer: Read the two product tables side by side. On current public pages, the standard 12V 100Ah (self-heating, OEM) lists about 1280 Wh, roughly 260 × 168 × 210 mm and about 10 kg with self-heating marked Yes and charge/discharge options at 50A or 100A class. The 12V 100Ah Ultra lists 1280 Wh, about 502 × 187 × 242 mm and about 13 kg, self-heating No as standard, and 100A maximum continuous charge and discharge. The 12V 200Ah Ultra lists 2560 Wh with 100A continuous limits. Pick the case that fits the tray and the current your inverter needs—optional upgrades differ by order.

Size and weight. Ultra 100Ah is a larger footprint than the Group-24-oriented standard 100Ah; tray fit notes appear in Group 24 tray fit. Measure before ordering 12V 100Ah Ultra (1280 Wh) versus 12V 100Ah (about 1.28 kWh).

Current. Ultra pages list 100A continuous charge and discharge on the 100Ah and 12V 200Ah Ultra (2560 Wh) models. Standard 12V 100Ah pages list selectable continuous ratings; match the inverter and fuse plan, as in cable and fuse sizing.

Self-heating. Standard 12V 100Ah lists self-heating Yes; Ultra 100Ah and 200Ah list self-heating No on the base table, with self-heating among optional upgrades. Cold charging behaviour therefore differs unless you order the option; see self-heating warm-up.

Energy. Ultra 200Ah lists 2560 Wh versus about 2500 Wh commonly cited for the standard 12V 200Ah page—use the live table when you buy.

Parallel limits. Ultra 100Ah lists up to four in parallel; confirm series/parallel rules on the page you order and follow SOC matching before paralleling.

Same care. Charge voltage 14.6V and 10V cut-off appear on both Ultra tables; use a lithium profile charger. IP65 and ABS shell are listed on the Ultra pages.

How to choose. Tight Group 24 tray and want built-in self-heating: start with the standard 100Ah page. Need a documented 100A continuous on a larger case: Ultra. Always re-check the live product table before PO. Keep serial numbers, photos and settings notes with the site file for later service or claims. Prefer written confirmation when thresholds, warranties, packing modes or inverter settings are involved. Re-check the live Redway product table before the purchase order is issued.

Selection/Engineering perspective

Reply

↳ Replying to Procurement perspective

Measure the compartment against Ultra dimensions before assuming a drop-in swap.

Read the two product tables side by side. On current public pages, the standard 12V 100Ah (self-heating, OEM) lists about 1280 Wh, roughly 260 × 168 × 210 mm and about 10 kg with self-heating marked Yes and charge/discharge options at 50A or 100A class. The 12V 100Ah Ultra lists 1280 Wh, about 502 × 187 × 242 mm and about 13 kg, self-heating No as standard, and 100A maximum continuous charge and discharge. The 12V 200Ah Ultra lists 2560 Wh with 100A continuous limits. Pick the case that fits the tray and the current your inverter needs—optional upgrades differ by order.

Verify before ordering: Specifications can change by revision; confirm dimensions, current limits and self-heating on the current Redway product pages for the SKUs ordered.

Editorial Q&A for battery selection and operations. Product figures cited from Redway product pages.

Related products

Related articles & discussions

redway-power-lithium-battery-engineer

Want a custom offer for lithium batteries? Contact our sales engineers now for A Quick Quote.