\n
Tel: +86 189 7608 1534
Tel: +86  (755)  2801 0506
  |  

Get Free Quote

REDWAY BATTERY / KNOWLEDGE

Why does a 12V lithium battery cut off while charging from a generator or charger?

rv battery 12v 100ah marine battery redway manufacturer factory oem bci group 24

← More Talk discussions

Redway Battery Editorial Team

Talk / Battery Q&A

Buyer question

An RV owner’s 12V lithium bank opens during generator charging even though the charger display still shows output.

Main answerRedway Battery Editorial Team

Main answer

Direct answer: A BMS cut-off during charge is usually protection, not random failure. Typical causes are charger or generator voltage spikes above the pack maximum, charge current above the pack limit, high or low temperature limits, wiring voltage drop that confuses a remote sense, or a charger still set to a lead-acid equalise profile. Measure voltage at the battery terminals during the event, confirm charger settings against the pack table, and fix the source before resetting. Packs such as 12V 100Ah, 150Ah and 200Ah classes share this logic even when current limits differ.

Over-voltage. Many Redway 12V pages list 14.6V maximum charge. Generator regulators and some converters can overshoot; see converter/charger compatibility and 12V 100Ah charger settings. Products in scope: 12V 100Ah (about 1.28 kWh), 12V 200Ah (about 2.5 kWh), 12V 150Ah (about 1.92 kWh).

Over-current. If the charger can push more than the pack continuous charge rating, the BMS may open. Turn charge current down or choose a matching charger.

Temperature. Charge limits often exclude freezing conditions unless a self-heating model or warm environment applies. Moving a cold pack indoors before charge is safer than forcing charge.

Generator quirks. Unstable RPM and poor filtering create ripple and spikes. A DC-DC charger between alternator/generator DC and the house bank can help; see DC-DC charging.

Wiring and sense. Measure at the terminals, not only at the charger. Undersized cables inflate voltage at the charger while the pack still sees stress—or the reverse. Related measurement habit: inverter low-battery shutdown.

After a trip. Note the fault code or app alarm, let the pack cool, then reconnect under a controlled low current. Repeated immediate re-trips mean the root cause remains.

Warranty boundary. Capture charger model, settings screenshots and terminal voltages before assuming a cell defect. Keep serial numbers, photos and settings notes with the site file for later service or claims. Prefer written confirmation when thresholds, warranties, packing modes or inverter settings are involved. Re-check the live Redway product table before the purchase order is issued. Train the people who will operate or receive the equipment, not only the buyer who signed the quote. Schedule a short review after the first weeks of use so habits and settings can be corrected early.

Selection/Engineering perspective

Reply

↳ Replying to Procurement perspective

Match charger voltage and current limits to the pack table; disable equalise.

A BMS cut-off during charge is usually protection, not random failure. Typical causes are charger or generator voltage spikes above the pack maximum, charge current above the pack limit, high or low temperature limits, wiring voltage drop that confuses a remote sense, or a charger still set to a lead-acid equalise profile. Measure voltage at the battery terminals during the event, confirm charger settings against the pack table, and fix the source before resetting. Packs such as 12V 100Ah, 150Ah and 200Ah classes share this logic even when current limits differ.

Verify before ordering: Exact BMS thresholds are model-specific; confirm charge voltage, current and temperature limits on the Redway page and with any charger maker guidance.

Editorial Q&A for battery selection and operations. Product figures cited from Redway product pages.

Related products

Related articles & discussions

redway-power-lithium-battery-engineer

Want a custom offer for lithium batteries? Contact our sales engineers now for A Quick Quote.