\n
Tel: +86 189 7608 1534
Tel: +86  (755)  2801 0506
  |  

Get Free Quote

REDWAY BATTERY / KNOWLEDGE

What should you ask before using a lithium battery in an AGV or automated forklift?

24V 200Ah Lithium Forklift Battery Manufacturer oem factory

← More Talk discussions

Redway Battery Editorial Team

Talk / Battery Q&A

Buyer question

An integrator is specifying lithium packs for a new AGV lane and needs a question list before the battery PO is released.

Main answerRedway Battery Editorial Team

Main answer

Direct answer: Ask who owns vehicle-to-battery communication, which protocol and map the AGV expects, how automatic charging contacts or pads are rated, what continuous and peak currents the duty cycle needs, how faults are reported to the fleet manager, and what commissioning tests prove a pack is ready. Lithium forklift modules can supply the energy, but AGV makers often require specific CAN messages, charge enable logic and mechanical interfaces. Put integration scope in writing so battery and vehicle warranties do not point at each other later.

Communication. Confirm CAN or other bus version, baud rate, and which SOC, current and fault signals the AGV controller requires. Packs such as the 24V 230Ah (about 5.88 kWh), 48V 280Ah-class and 24V 150Ah-class may offer RS485/CAN options—match the AGV maker map. Related: CAN/RS485 charger communication.

Auto charging. Document contact metallurgy, alignment tolerance, interlock signals and max charge current at the pad or rail. A human-operated SB connector habit does not automatically equal an AGV dock.

Duty and current. Collect peak accel current, lift or conveyor loads, and opportunity-charge windows. Undersized continuous ratings cause protect trips that look like vehicle faults.

Mechanical fit. Compartment, connectors and any counterweight rules still apply on automated trucks; see compartment and counterweight fit.

Monitoring. Decide whether 4G/cloud or only local bus logs feed the fleet system; see 4G cloud monitoring. Alarm routing must reach the AGV supervisor software.

Commissioning. Agree a first-day checklist with serial capture and a loaded run; see first-day commissioning.

Contracts. State which party supplies protocol documentation, who changes BMS parameters, and how firmware updates are approved. Ask Redway for datasheets and interface notes available on request. Keep serial numbers, photos and settings notes with the site file for later service or claims. Prefer written confirmation when thresholds, warranties, packing modes or inverter settings are involved. Re-check the live Redway product table before the purchase order is issued. Train the people who will operate or receive the equipment, not only the buyer who signed the quote. Schedule a short review after the first weeks of use so habits and settings can be corrected early. Documents such as manuals and test summaries are available on request when not shown on the public page.

Selection/Engineering perspective

Reply

↳ Replying to Procurement perspective

Collect peak and continuous current from the AGV duty cycle before choosing Ah alone.

Ask who owns vehicle-to-battery communication, which protocol and map the AGV expects, how automatic charging contacts or pads are rated, what continuous and peak currents the duty cycle needs, how faults are reported to the fleet manager, and what commissioning tests prove a pack is ready. Lithium forklift modules can supply the energy, but AGV makers often require specific CAN messages, charge enable logic and mechanical interfaces. Put integration scope in writing so battery and vehicle warranties do not point at each other later.

Verify before ordering: AGV integration details are vehicle-maker specific; confirm protocol maps, charge contacts and current limits with the AGV OEM and Redway for the chosen pack.

Editorial Q&A for battery selection and operations. Product figures cited from Redway product pages.

Related products

Related articles & discussions

redway-power-lithium-battery-engineer

Want a custom offer for lithium batteries? Contact our sales engineers now for A Quick Quote.