\n
Tel: +86 189 7608 1534
Tel: +86  (755)  2801 0506
  |  

Get Free Quote

REDWAY BATTERY / KNOWLEDGE

How do lifted kits and larger tyres change lithium golf cart range and current?

72V 100Ah LiFePO4 Golf Cart Battery (S72105P) factory oem manufacturer sightseeing car club car

← More Talk discussions

Redway Battery Editorial Team

Talk / Battery Q&A

Buyer question

A dealer sells lifted 48V and 72V carts with oversized tyres and wants to know which lithium packs still finish 18 holes without protect trips.

Main answerRedway Battery Editorial Team

Main answer

Direct answer: Lift kits and larger tyres usually increase rolling resistance, change effective gearing and raise average and peak current for the same ground speed. That shortens range and stresses BMS current limits even when Ah looks unchanged. Prefer packs with adequate continuous and peak discharge headroom, verify cable and fuse sizing, and test heat after a hilly round. Do not quote stock-cart range numbers on a lifted build.

What changes mechanically. Larger diameter tyres and higher stance often mean the motor turns differently for the same mph and works against more drag off-road. Packs such as the 72V 100Ah golf pack (about 7.68 kWh), 48V 160Ah higher-current golf pack and 48V 100Ah high-current golf pack are options dealers compare when lifts are standard on the build sheet.

Current and protect trips. Watch for hill trips and voltage sag; see protection trips on hills and voltage drop under acceleration.

Range expectations. Re-estimate energy per round after the lift; method in energy per round. Accessory loads still stack on top.

Cables and fuses. Higher continuous current needs correct main fuse and cable size; see main fuse and cable sizing.

Heat checks. After a test loop, feel connectors and measure pack temperature. Persistent high heat means the duty exceeds the pack or the mechanical setup needs review.

Towing and cargo. Lifted utility carts that also tow need the same honesty as sizing for towing.

Sales practice. Upsell capacity or high-current variants only when the measured or expected current justifies it—not as a default lift tax. Keep serial numbers, photos and settings notes with the site file for later service or claims. Prefer written confirmation when thresholds, warranties, packing modes or inverter settings are involved. Re-check the live Redway product table before the purchase order is issued. Train the people who will operate or receive the equipment, not only the buyer who signed the quote. Schedule a short review after the first weeks of use so habits and settings can be corrected early. Documents such as manuals and test summaries are available on request when not shown on the public page. Keep serial numbers, photos and settings notes with the site file for later service or claims.

Selection/Engineering perspective

Reply

↳ Replying to Procurement perspective

Match high-current pack options to measured or estimated current, then confirm fuse and cable ratings.

Lift kits and larger tyres usually increase rolling resistance, change effective gearing and raise average and peak current for the same ground speed. That shortens range and stresses BMS current limits even when Ah looks unchanged. Prefer packs with adequate continuous and peak discharge headroom, verify cable and fuse sizing, and test heat after a hilly round. Do not quote stock-cart range numbers on a lifted build.

Verify before ordering: Range and current impacts of lift kits are vehicle-specific; confirm pack continuous/peak ratings on the Redway page and validate with a site test.

Editorial Q&A for battery selection and operations. Product figures cited from Redway product pages.

Related products

Related articles & discussions

redway-power-lithium-battery-engineer

Want a custom offer for lithium batteries? Contact our sales engineers now for A Quick Quote.