\n
Tel: +86 189 7608 1534
Tel: +86  (755)  2801 0506
  |  

Get Free Quote

REDWAY BATTERY / KNOWLEDGE

How do you replace a lead-acid bank in an off-grid solar system with rack lithium?

48v 100ah 5kwh rack-mounted lithium battery pm-lv48100-3u snmp server rack battery 4.8kwh

← More Talk discussions

Redway Battery Editorial Team

Talk / Battery Q&A

Buyer question

An off-grid cabin still runs flooded lead-acid; the owner wants 48V rack lithium behind the existing hybrid inverter and solar charge controllers.

Main answerRedway Battery Editorial Team

Main answer

Direct answer: Confirm the inverter and charge controllers support a lithium profile and the chosen nominal voltage (48V or 51.2V class), size rack capacity for daily load and days of autonomy, then change charge voltages, charge current limits, low-voltage cut-offs and communication settings before connecting. Reuse the inverter only if the maker battery compatibility list says so. Replace undersized cables, breakers and any lead-acid-only monitors. Commission module by module with matched SOC and a witnessed charge/discharge test.

Compatibility first. Check the inverter lithium list and whether it wants 15S (48V) or 16S (51.2V) modules. Options such as the 48V 100Ah 3U rack, 48V 200Ah 5U rack (about 9.6 kWh) and 51.2V 100Ah 3U rack are not interchangeable on a closed-loop bus without checking the inverter; see 48V vs 51.2V and inverter compatibility.

Settings change. Lead-acid absorb and float values will over-stress or under-charge LiFePO4. Set lithium charge voltage, charge current and low-battery shutdown per the inverter and battery manuals. Prefer closed-loop CAN or RS485 when available; see CAN/RS485 connection and closed vs open loop.

Cables and protection. Recalculate DC cable size and breaker rating for the new charge and discharge currents. Lead-acid banks often used different parallel fuse practice; lithium needs correct breakers and torque on busbars. Label every run with voltage and max current.

Physical install. Plan 2U/3U/4U/5U height, floor loading and clearance; see rack space and weight. Remove corroded lead-acid hardware and clean acid residue before mounting. Indoor rules: indoor fire-code questions.

Commissioning. Bring modules to similar SOC before paralleling, enable communication, and run a controlled charge then discharge to the planned reserve; see parallel commissioning.

Sizing. Recalculate daily kWh and autonomy; lithium usable fraction differs from lead-acid rules of thumb—see sizing for daily load and SOC reserve.

Documents and code. Keep inverter firmware notes, battery manuals and any test summaries on file. Certificates and datasheets are available on request where not on the public page. Use a qualified installer for earthing and local electrical rules. Keep serial numbers, photos and settings notes with the site file for later service or claims. Prefer written confirmation when thresholds, warranties, packing modes or inverter settings are involved.

Selection/Engineering perspective

Reply

↳ Replying to Procurement perspective

Budget new DC protection and a settings session; the battery swap is not only a mechanical change.

Confirm the inverter and charge controllers support a lithium profile and the chosen nominal voltage (48V or 51.2V class), size rack capacity for daily load and days of autonomy, then change charge voltages, charge current limits, low-voltage cut-offs and communication settings before connecting. Reuse the inverter only if the maker battery compatibility list says so. Replace undersized cables, breakers and any lead-acid-only monitors. Commission module by module with matched SOC and a witnessed charge/discharge test.

Verify before ordering: Inverter compatibility and exact charge settings are manufacturer-specific; confirm with the inverter manual and Redway for the module models chosen.

Editorial Q&A for battery selection and operations. Product figures cited from Redway product pages.

Related products

Related articles & discussions

redway-power-lithium-battery-engineer

Want a custom offer for lithium batteries? Contact our sales engineers now for A Quick Quote.